Locker Cleaning Guide

Protect your investment with some simple routine cleaning.

Use a solution of mild soap and warm water along with a soft cloth or sponge. Once cleaned with this solution follow up by wiping away any residue with fresh clean water. This process should be completed several times throughout the year to prolong the life of the finish.

Avoid Solvents, Abrasives, and Harsh Chemical Cleaners.

Where a solvent is absolutely necessary to remove materials from the surface, such as adhesives, the weakest possible solvent should be used (e.g. methylated spirits or 70% isopropyl alcohol). Do not use acetone or commercial cleaning solutions. 

For Outdoor Lockers a light waxing is recommended for the exterior surfaces to decrease the effects of harsh outdoor environments. Wax the exposed surface semi-annually. Lightly wax the coated surfaces with a high grade, non-abrasive car wax that contains a U.V blocker and/or U.V. inhibitors. Do not use compound waxes that contain abrasives and be sure to wipe off any residual wax. 

<end>

• Related Articles

• Multi-Package Delivery

  Luxer One offers an optional feature for locker systems called multi-package delivery.  This feature will allow mail carriers to deliver additional packages to a locker that is already occupied, as long as the additional packages are for the same ...

• Power Cycling Your Luxer One Lockers

  Occasionally a system will lose the internet connection and be unable to notify residents about packages, or a component will go offline.  One of the easiest ways to troubleshoot this is to power cycle your lockers.  If you have the ability, we ...

• How to remove a resident

  Luxer One's Building Manager portal offers property staff a convenient method to oversee residents. This guide will outline the steps to deactivate a resident as an active Luxer One recipient in your community. Step 1 - Log into your Building Manager ...

• How to Reboot Your iPad

  Sometimes the iPad needs to be rebooted manually. You will need your Manager Pin & Combination Code (or Panel Keys for older systems) before heading to lockers. You can locate your manager pin in Building Manager, under the Locker tab. Access the ...

• System Reset Instructions

  Lockers with a combination code panel (Gen 4): Needed: Manager PIN, lock combination code Using the correct combination code, open the combination lock on the same bank as the one with the iPad by twisting and pulling off the panel. Lift up on the ...